Bjm-pumps JX1500HSS-F Manuel d'utilisateur télécharger pdf (Page 8)

POSITIONING THE PUMP

BJM Pumps, J-F & JX-F Series pumps are designed to operate fully submerged. Data

sheets can be obtained online at HHUUwww.bjmpumps.comUUHH or by calling BJM Pumps, LLC at

860-399-5937.

 Do not run pump dry.

 Pump liquid should not exceed a maximum temperature of 200°F (93°C).

 Never place the pump on loose or soft ground. The pump may sink, preventing

water from reaching the impeller. Place on a solid surface or suspend the pump

with a lifting rope/chain. The J-F & JX-F Series pumps are provided with a

suction strainer to prevent large solids from clogging the impeller. Any spherical

solids which pass through the strainer should pass through the pump.

 For maximum pumping capacity, use the proper size non-collapsible hose or rigid

piping. A check valve may be installed after the discharge to prevent back flow

when the pump is shut off.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Pas de commentaire

Bjm-pumps JX1500HSS-F Manuel d'utilisateur Page 8