Bjm-pumps XP-SKX150CSS Manuel d'utilisateur télécharger pdf (Page 10)

 More frequent inspections are required if the pump is used in a harsh

environment.

 Preventative maintenance should be performed to reduce the chance of

premature failure.

 Worn impellers and lip seals should be replaced.

 Cut or cracked power cords must be replaced. (Never operate a pump with a

cut, cracked or damaged power cord.)

 Maintenance should always be done when taking a pump out of service before

storage.

 The impeller to suction cover clearance should be adjusted to between 0.01” to

0.02” for optimal cutting of the shredder. Shim kits are available if adjustment is

required.

1) Clean pump of dirt and other build up.

2) Check condition of oil around the shaft seals.

3) Check hydraulic parts: check for wear.

4) Inspect power cable. Make sure that it is free of nicks or cuts.

CHANGING SEAL OIL

Refer to EIM ELECTRIC CO., LTD Instruction Manual for Installation, Operation and

Maintenance for the Explosion Proof Submersible Motors (EMQY Series; FM Approved

for Class I, Division 1, Group C & D).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Pas de commentaire

Bjm-pumps XP-SKX150CSS Manuel d'utilisateur Page 10