Bjm-pumps XP-SKX150CSS Manuel d'utilisateur télécharger pdf (Page 9)

Consult EIM ELELCTRIC Co., LTD. Instruction Manual for Installation, Operation

and Maintenance before connecting, operating or conducting maintenance on the

Explosion Proof Submersible Motor.

STOPPING

To stop the pump (manual and automatic mode) turn off the breaker, or turn the

electrical power source off (generator).

TROUBLE SHOOTING

Disconnect the electrical power source to the pump BEFORE

attempting any type of trouble shooting, service or repair.

PUMP WILL NOT RUN

Refer to EIM ELECTRIC CO., LTD Instruction Manual for Installation, Operation and

Maintenance for the Explosion Proof Submersible Motors (EMQY Series; FM Approved

for Class I, Division 1, Group C & D).

PUMP RUNS BUT DOES NOT DELIVER RATED CAPACITY

1. Discharge line clogged, restricted or hose kinked. Check discharge hose/pipe.

2. Worn impeller and/or suction cover. Inspect and replace as necessary.

3. Pump overloaded due to liquid pumped being too thick.

4. Pumping air. Check liquid level and position of pump.

5. Excessive voltage drops due to long cables.

6. Pump running backwards, check rotation.

SERVICING YOUR SUBMERSIBLE PUMP

Pump should be disconnected from the electric power supply before proceeding to do

any service or maintenance.

Service on submersible electric motor should only be performed by a qualified

electrician. Refer to EIM ELECTRIC CO., LTD Instruction Manual for Installation,

Operation and Maintenance for the Explosion Proof Submersible Motors (EMQY Series;

FM Approved for Class I, Division 1, Group C & D).

MAINTAINING YOUR PUMP

 Pump should be disconnected from the electric power supply before proceeding

to do any service or maintenance.

 Pump should be inspected at regular intervals.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 41 42

Pas de commentaire

Bjm-pumps XP-SKX150CSS Manuel d'utilisateur Page 9